The influence of moisture content in the environment during manufacture of a novel cobalt-free UP matrix reinforced with flax fibres, on the fibre–matrix adhesion was studied. Flax surface energy was experimentally determined by measuring contact angles on technical fibres, using the Wilhelmy technique and the acid–base theory. The mechanical strength of the interface under different humidity conditions was characterized by the critical local value of interfacial shear stress, τd, at the moment of crack initiation, which was assessed by single-fibre pull-out tests. Differential scanning calorimetry and X-ray photoelectron spectroscopy analysis gave further insight into the topic. The results suggest that the effect of humidity during manufacturing on the composite interface might be limited. However, longitudinal composite strength decreased somewhat for composites produced in humid conditions, showing that there is some detrimental effect of high levels of moisture during cure on the fibre mechanical performance, likely caused by some fibre degradation.
Fuentes, C.A ; Ting, K.W. ; Dupont-Gillain, Christine C. ; Steensma, M. ; Talma, A.G. ; et. al. Effect of humidity during manufacturing on the interfacial strength of non-pre-dried flax fiber/unsaturated polyester composites. In: Composites Part A: Applied Science and Manufacturing, Vol. 84, p. 209-215 (2016)
